15 Jun 2017

Embellish Card with Flocked Heat Transfer



I love adding a little something extra to my cards, especially those for very special occasions. I've found that using flocked heat transfer material gives fantastic fuzzy texture to select elements and is very easy to do.



On the Silhouette UK Blog today I've combined the use of the heat transfer with a new style of card; the new Insta-cube card by Lori Whitlock. They are small folded cards powered by a rubber band. When you pull a card from its decorated sleeve it pops up to form a cube. I know a couple who are expecting their first baby later in the year, so I selected the baby version and think it will make a lovely keepsake.




I gave some of the elements (the giraffe, the heart and the 'B' in baby) a fluffy texture to make the card and sleeve extra tactile. Although I used flocked heat transfer vinyl, felt or speciality flocked paper could be used instead.




Materials
Medium-weight card for the base

Printable Cardstock

Coloured or patterned card/paper

Rubber band (about 2.75"/ 70 mm)

Strong double-sided adhesive tape

Yellow Flocked Heat Transfer (HTV)

Baby Insta-Cube Card file by Lori Whitlock #198865

Iron or Heat Press

Printer



How to Use Heat Transfer Material

1. Select the pieces that you are going to cut from heat transfer. Remember that heat transfer elements need to be flipped.  

2. Place heat transfer material shiny side to the mat and cut the pieces and then weed (remove the bits you don't need).

3. Separate the elements and then activate the adhesive on the HTV by pressing the designs into place. Use an iron, or heat press on a lower heat setting than normal and allow to cool before carefully peeling off the backing (warning: it does get very hot).

I used heat setting 6 on my Hobby Jack heat press (which I believe is around 120ÂșC, so a good bit cooler than you'd use for garments). You can use an iron (non-steam) with a similar temperature, but if you move the iron around, the design may shift too. Press initially for 8 seconds, and allowed it to cool and then re-press for a few more seconds if it hasn't stuck.  Ensure you use a protective layer between the HTV and the hot platen. For ease I use a silicon sheet fixed to the upper platen of my press.
 
4. Check carefully by lifting a corner of the backing sheet. You may need to encourage the flock to separate from the backing with a flat tool, and hold down the part that has separated against the card (don't pull it straight up from the card). A heat press isn't necessary, but it does a better job of applying heat evenly so that your base card doesn't scorch.






This is a such a fun card design, and there are a number of other designs to choose from.

I think that the fuzzy elements make this card extra special. Do let me know if you have a go at using heat transfer on your cards technique in the comments below.









14 comments:

Laine said...

So bright and beautiful. Adorable!
xx

KarinsArtScrap said...

this is so cute and very beautiful Janet
Gr Karin

Janet Packer said...

Thanks Laine, the heat transfer gives a super neat look.

Janet Packer said...

Thank you Karin. I was pleased with how the card turned out. I shall definitely use this style of card again.

Rachel Brown said...

This is a lovely keepsake xx

Janet Packer said...

Thanks Rachel, I hope so.

Jackie T said...

Wow Janet this is a stunning project. I love the cute little giraffe. Take care. Hugs Jackie

Paper and Stuff said...

This is so sweet and totally beautiful. x

Unknown said...

Wow Janet, this is an awesome project. Very clever technique. Cathy x

Holley (Tondre) Barnhart said...

super cute Baby project. Love the technique

Shabneez said...

Ooooh not come across this product before. Will have a hunt. Perfect gift for a newborn Janet. Shabneez

Janet Packer said...

Thanks Shabneez. I love the flocked Heat Transfer. It's fantastic for adding details to felt shapes too.

Jan said...

Love this Janet xx Jan

Pauline said...

Love that idea, must get some flocked Heat Transfer. I have used the very thin foam cut on my Cameo to do something similar, but I like the felt look of that product. The very thin craft foam I get from Dollar Tree here in USA, not sure it is available there, I use it for tons of stuff and every so cheap.