Do you love using glitter, but hate the mess it leaves behind? Adding regular glitter with wet adhesive can really add wow factor to cards but tends leave a glittery trail behind. I made this sparkling card with a new SVG release from Sanqunetti Design - the Polar Bear Girl SVG using two no-mess glitter techniques.
Supplies Used
I used all the above which including patterned papers are from Kaisercraft's Bubblegum Hills, 6 1/2" Paper Pad (recently retired). For the glittery parts I used regular superfine glitter and also Silhouette's Glitter Heat Transfer material.
Card Technique
I made a shaped card base in the Silhouette Studio software using an offset of the bear sitting on a present. The present is simply a rectangle draw in the software, and the ribbons are just thinner rectangles. I used a 2 mm offset of the two pieces, then made a mirrored copy to the left, overlapped the two, and then welded them together. The small extra shapes generated were then deleted to give just the outline. I added a few simple tag shapes, trying out a couple of different colours of sketch pens. This is what I cut out from the white frost glimmer card.
It was then simply a matter of cutting the other pieces out of card and paper. I didn't cut the bear feet separately but made a combined grey base welding all the shapes together, and borrowing the right leg cut line from the feet, adding it to the white bear body. More about the bear body later.
Now, here is my first non-mess glitter method.
METHOD 1. Apply Glitter with Double-Sided Adhesive
Cut the parcel from regular patterned paper (no fancy finish) and apply a matching piece of double-sides adhesive sheet over the top. Expose the sticky surface of the sheet and sprinkle it with clear super-fine crystal glitter.
Knock off the excess glitter and burnish the newly glittered surface with a paper folder. Use one of the scrap protective layers from the adhesive sheet to cover the glittered surface while rubbing to protect the paper folder and rub firmly to ensure the glitter is firmly adhered to the paper.
After burnishing in this way you'll have a hard time shifting any of the glitter!
METHOD 2: Using Glitter Heat Transfer Material on Card
To make the he glittery bear, I cut the main bear body from white glitter heat transfer material. The material is cut with the shiny side to the mat, and the design should be flipped horizontally before cutting so that the bear is oriented correctly.
This is the design piece that I cut. Do see where the I placed the right leg piece borrowed from the foot?
I used a heat press to activate the adhesive on the heat transfer material, but an iron would work too. Use a lower temperature than you would normally use to attach heat transfer to fabric to avoid distorting the supporting card. Apply for just a few seconds and then check if it has adhered. Peel off the backing sheet and press for another second or so and the glitter is permanently stuck.
I hope you'll try these methods out; they both give a really neat professional look - so much easier and cleaner than using liquid glue.
The cute Girl Polar Bear SVG file is available now from the Sangunetti Design
website and also from the
Etsy store.
This card has been entered in the following challenges:
ABC Christmas Challenge -
'W' for White
Craft Rocket Challenges -
Christmas Is Coming
Simon Says Stamp -
Christmas Gift Tag
Crafty Cats Challenge -
ATG Beartastic challenge #391
If you like polar bears - here are a
Polar Bear shaker card and
Polar Bear personalised gift boxes that I made from the Sangunetti Design
Christmas Polar Bear SVG.
